Jump to content

Instagram


Photo

Body panel screw


  • Please log in to reply
21 replies to this topic

#1 LIGISTX

LIGISTX

    Rewards Level 3

  • Members
  • 6,368 posts
  • 5660 reward credits
  • Los Angeles
  • California
Garage View Garage

Posted September 11, 2017 - 12:52 AM

So I am not sure what screw this is, and the diagram on white bear lake parts isn't quite getting me there.

Apparently I never put these on when I did my boss 302 front end. I did end up with two extra screws, but they are not what I need. Who knows where they where meant to go.... Lol

I need one per side, it screws the lower valence into the bumper, screw head is on the bumper side. The location is the most rear point in the wheel area. And there appears to be a metal "nut plate" it would go into on the valence side.

38126ccd5635923f1d41c9cd1c6d5330.jpg


Sent from my iPhone using Tapatalk

JLT CAI -- 73mm BBK TB -- Lone Wolf Ported Mani's -- BBK Ceramic Shorties -- Borla ATAK -- MPT 91 Tune
MGW Race Spec -- RAM HDX -- Fidanza 12lbs flywheel -- DSS Aluminum -- 3.73 Rear
Koni Yellow's -- J&M CC Plates -- SR Springs -- Boss 302 Strut Brace -- BMR LCA's, Relo's, Adj. PHR, Motor Mounts
275/40 R19 MPSS -- 19x9.5 SVE Drifts -- Hawk HPS 5.0
JLT Oil Seperator -- SS Clutch & Brake Lines -- Billlet Grille -- GT500 Rear Diffuser -- Blue on Black Cue Ball Shifter Knob -- GT500 Steering Wheel
250 watt 10" Bazookah Tube -- JBL GTO8628 6x8"
The Smoking Tire One Take:


#2 popeye

popeye

    World's fastest Ecoboost manifold swapped 3.7, yo haters.

  • Members
  • 3,695 posts
  • 3569 reward credits
  • Pennsylvania

Posted September 11, 2017 - 12:53 AM

I don't know,, but dude you are hairy as fuck.

Sent from my SAMSUNG-SM-G890A using Tapatalk

2012 V6 6M - MPT tune - Cold Air Intake - GT throttle body 80 mm - Mac Shorties - Stock cats/no resonators - 2 3/4" exhaust after cats - GT Mufflers
Aluminum DS - 3.73 gears - Konis yellows - Steeda Sport springs - 255/45-18 Toyo Sports


#3 Grimace427

Grimace427

    ASE Master Certified Technician

  • Administrators
  • 16,827 posts
  • 14901 reward credits
  • Sterling
  • Virginia
Garage View Garage

Posted September 11, 2017 - 12:03 PM

Hardware store mang.


-2011 5.0 Black/Saddle, MT-82, 3.73, Brembo

-Tuned by Matt Honeycutt from Redliners Tuning
-Dynatech 1 7/8" longtube headers, 3" catted custom h-pipe with Borla S-Types, Boss intake, Steeda CAI
-Dynotech driveshaft, FRPP 'P', Strange 10-way adj. struts, Viking double adjustable shocks, BMR UCA/LCA, relo brackets, Steeda STB, JHR shifter/clutch line, Blowfish Racing solid shifter bracket(2014 setup)
-438/421, 12.19 @ 116mph(2011 setup)
-1967 Fastback, small block, 4-speed, work in progress

-Check out my YouTube channel! https://www.youtube....ger427/featured


#4 LIGISTX

LIGISTX

    Rewards Level 3

  • Members
  • 6,368 posts
  • 5660 reward credits
  • Los Angeles
  • California
Garage View Garage

Posted September 11, 2017 - 01:17 PM

Hardware store mang.


Yea but that will be hard. I have no idea what the threading is.


Sent from my iPhone using Tapatalk

JLT CAI -- 73mm BBK TB -- Lone Wolf Ported Mani's -- BBK Ceramic Shorties -- Borla ATAK -- MPT 91 Tune
MGW Race Spec -- RAM HDX -- Fidanza 12lbs flywheel -- DSS Aluminum -- 3.73 Rear
Koni Yellow's -- J&M CC Plates -- SR Springs -- Boss 302 Strut Brace -- BMR LCA's, Relo's, Adj. PHR, Motor Mounts
275/40 R19 MPSS -- 19x9.5 SVE Drifts -- Hawk HPS 5.0
JLT Oil Seperator -- SS Clutch & Brake Lines -- Billlet Grille -- GT500 Rear Diffuser -- Blue on Black Cue Ball Shifter Knob -- GT500 Steering Wheel
250 watt 10" Bazookah Tube -- JBL GTO8628 6x8"
The Smoking Tire One Take:


#5 Grimace427

Grimace427

    ASE Master Certified Technician

  • Administrators
  • 16,827 posts
  • 14901 reward credits
  • Sterling
  • Virginia
Garage View Garage

Posted September 11, 2017 - 02:41 PM

Just jam it in thur.


-2011 5.0 Black/Saddle, MT-82, 3.73, Brembo

-Tuned by Matt Honeycutt from Redliners Tuning
-Dynatech 1 7/8" longtube headers, 3" catted custom h-pipe with Borla S-Types, Boss intake, Steeda CAI
-Dynotech driveshaft, FRPP 'P', Strange 10-way adj. struts, Viking double adjustable shocks, BMR UCA/LCA, relo brackets, Steeda STB, JHR shifter/clutch line, Blowfish Racing solid shifter bracket(2014 setup)
-438/421, 12.19 @ 116mph(2011 setup)
-1967 Fastback, small block, 4-speed, work in progress

-Check out my YouTube channel! https://www.youtube....ger427/featured


#6 mariusvt

mariusvt

    Rewards Level 3

  • Members
  • 4,284 posts
  • 3691 reward credits
  • Pennsylvania
Garage View Garage

Posted September 11, 2017 - 11:41 PM

Yea but that will be hard. I have no idea what the threading is.


Sent from my iPhone using Tapatalk

If you're buying a nut and bolt who cares!

2013 SGM 3.7 | MPT Tune | JBA Titanium Ceramic Shorty Headers | MGW Gen 1 | Blowfish Street Bracket | BBK TB | 18" Charcoal AMR | FRPP 3.55 | BMR LCA | Steeda Panhard Bar |  Dynotech 3.5" Driveshaft |

 

 


#7 LIGISTX

LIGISTX

    Rewards Level 3

  • Members
  • 6,368 posts
  • 5660 reward credits
  • Los Angeles
  • California
Garage View Garage

Posted September 11, 2017 - 11:57 PM

If you're buying a nut and bolt who cares!

It threads into the lower black part, there is a nut plate thing in there. So it has to be whatever thread that is.


JLT CAI -- 73mm BBK TB -- Lone Wolf Ported Mani's -- BBK Ceramic Shorties -- Borla ATAK -- MPT 91 Tune
MGW Race Spec -- RAM HDX -- Fidanza 12lbs flywheel -- DSS Aluminum -- 3.73 Rear
Koni Yellow's -- J&M CC Plates -- SR Springs -- Boss 302 Strut Brace -- BMR LCA's, Relo's, Adj. PHR, Motor Mounts
275/40 R19 MPSS -- 19x9.5 SVE Drifts -- Hawk HPS 5.0
JLT Oil Seperator -- SS Clutch & Brake Lines -- Billlet Grille -- GT500 Rear Diffuser -- Blue on Black Cue Ball Shifter Knob -- GT500 Steering Wheel
250 watt 10" Bazookah Tube -- JBL GTO8628 6x8"
The Smoking Tire One Take:


#8 Grimace427

Grimace427

    ASE Master Certified Technician

  • Administrators
  • 16,827 posts
  • 14901 reward credits
  • Sterling
  • Virginia
Garage View Garage

Posted September 12, 2017 - 12:08 PM

It's just a screw, doesn't matter the exact thread pitch. Don't over think this LIGI!


-2011 5.0 Black/Saddle, MT-82, 3.73, Brembo

-Tuned by Matt Honeycutt from Redliners Tuning
-Dynatech 1 7/8" longtube headers, 3" catted custom h-pipe with Borla S-Types, Boss intake, Steeda CAI
-Dynotech driveshaft, FRPP 'P', Strange 10-way adj. struts, Viking double adjustable shocks, BMR UCA/LCA, relo brackets, Steeda STB, JHR shifter/clutch line, Blowfish Racing solid shifter bracket(2014 setup)
-438/421, 12.19 @ 116mph(2011 setup)
-1967 Fastback, small block, 4-speed, work in progress

-Check out my YouTube channel! https://www.youtube....ger427/featured


#9 Unclenard

Unclenard

    FFM Owner

  • Super Mod
  • 3,043 posts
  • 2527 reward credits
  • St Petersburg
  • Florida
Garage View Garage

Posted September 12, 2017 - 04:04 PM

He is an engineer, he has to overthink it!  Take the metal clip off and bring it to the hardware store.


2012 V6 Premium  •  Kona Blue  •  Charcoal black leather  •  1.79 60' 12.527 @ 107.47 mph Unclenard.com
Super Six ported heads & upper/lower intakes  •  MPT dyno tuned  •  Airaid CAI  •  BBK TB • BBK shorty headers & O/R X-pipe • Borla ATAK • DSS • 3.73 gears Circle D 5C

Forgestar F14's 19x9/19x10 • Strange Adj. Shocks • BMR LCAs • UPR UCA & bracket • Eaton Detroit Truetrac

M/T ET Streets on SVE Drag Wheels 17x4.5/15x8  •  Steeda radiator support  •  CHE bumper support  •  Odyssey PC680 with custom mount

 

ForumSig02.jpg


#10 Grimace427

Grimace427

    ASE Master Certified Technician

  • Administrators
  • 16,827 posts
  • 14901 reward credits
  • Sterling
  • Virginia
Garage View Garage

Posted September 12, 2017 - 05:39 PM

I'm a mechanic..........we make things work even when they don't want to.


-2011 5.0 Black/Saddle, MT-82, 3.73, Brembo

-Tuned by Matt Honeycutt from Redliners Tuning
-Dynatech 1 7/8" longtube headers, 3" catted custom h-pipe with Borla S-Types, Boss intake, Steeda CAI
-Dynotech driveshaft, FRPP 'P', Strange 10-way adj. struts, Viking double adjustable shocks, BMR UCA/LCA, relo brackets, Steeda STB, JHR shifter/clutch line, Blowfish Racing solid shifter bracket(2014 setup)
-438/421, 12.19 @ 116mph(2011 setup)
-1967 Fastback, small block, 4-speed, work in progress

-Check out my YouTube channel! https://www.youtube....ger427/featured


#11 mariusvt

mariusvt

    Rewards Level 3

  • Members
  • 4,284 posts
  • 3691 reward credits
  • Pennsylvania
Garage View Garage

Posted September 12, 2017 - 05:41 PM

When in doubt, zip ties

2013 SGM 3.7 | MPT Tune | JBA Titanium Ceramic Shorty Headers | MGW Gen 1 | Blowfish Street Bracket | BBK TB | 18" Charcoal AMR | FRPP 3.55 | BMR LCA | Steeda Panhard Bar |  Dynotech 3.5" Driveshaft |

 

 


#12 LIGISTX

LIGISTX

    Rewards Level 3

  • Members
  • 6,368 posts
  • 5660 reward credits
  • Los Angeles
  • California
Garage View Garage

Posted September 13, 2017 - 01:10 AM

I'm a mechanic..........we make things work even when they don't want to.


04a93f769b951523f423708e5b6dc802.jpeg

I could shove any screw down that but plates throat, but that is going to cross thread it all the shit and possibly not even hold very well.


Sent from my iPhone using Tapatalk

JLT CAI -- 73mm BBK TB -- Lone Wolf Ported Mani's -- BBK Ceramic Shorties -- Borla ATAK -- MPT 91 Tune
MGW Race Spec -- RAM HDX -- Fidanza 12lbs flywheel -- DSS Aluminum -- 3.73 Rear
Koni Yellow's -- J&M CC Plates -- SR Springs -- Boss 302 Strut Brace -- BMR LCA's, Relo's, Adj. PHR, Motor Mounts
275/40 R19 MPSS -- 19x9.5 SVE Drifts -- Hawk HPS 5.0
JLT Oil Seperator -- SS Clutch & Brake Lines -- Billlet Grille -- GT500 Rear Diffuser -- Blue on Black Cue Ball Shifter Knob -- GT500 Steering Wheel
250 watt 10" Bazookah Tube -- JBL GTO8628 6x8"
The Smoking Tire One Take:


#13 Grimace427

Grimace427

    ASE Master Certified Technician

  • Administrators
  • 16,827 posts
  • 14901 reward credits
  • Sterling
  • Virginia
Garage View Garage

Posted September 13, 2017 - 12:10 PM

It's a screw going into a clip. They can't cross thread. It's not a bolt.


-2011 5.0 Black/Saddle, MT-82, 3.73, Brembo

-Tuned by Matt Honeycutt from Redliners Tuning
-Dynatech 1 7/8" longtube headers, 3" catted custom h-pipe with Borla S-Types, Boss intake, Steeda CAI
-Dynotech driveshaft, FRPP 'P', Strange 10-way adj. struts, Viking double adjustable shocks, BMR UCA/LCA, relo brackets, Steeda STB, JHR shifter/clutch line, Blowfish Racing solid shifter bracket(2014 setup)
-438/421, 12.19 @ 116mph(2011 setup)
-1967 Fastback, small block, 4-speed, work in progress

-Check out my YouTube channel! https://www.youtube....ger427/featured


#14 LIGISTX

LIGISTX

    Rewards Level 3

  • Members
  • 6,368 posts
  • 5660 reward credits
  • Los Angeles
  • California
Garage View Garage

Posted September 13, 2017 - 03:49 PM

It's a screw going into a clip. They can't cross thread. It's not a bolt.


I thought they had a few threads to them, not just "sheet metal with a hole" in them.

Either way, it wood be nice for it to be correct..... No help in trying to figure out the right part number? I figure since I am about to order O2's from white bear lake anyways, might as well throw in the proper screws.


Sent from my iPhone using Tapatalk

JLT CAI -- 73mm BBK TB -- Lone Wolf Ported Mani's -- BBK Ceramic Shorties -- Borla ATAK -- MPT 91 Tune
MGW Race Spec -- RAM HDX -- Fidanza 12lbs flywheel -- DSS Aluminum -- 3.73 Rear
Koni Yellow's -- J&M CC Plates -- SR Springs -- Boss 302 Strut Brace -- BMR LCA's, Relo's, Adj. PHR, Motor Mounts
275/40 R19 MPSS -- 19x9.5 SVE Drifts -- Hawk HPS 5.0
JLT Oil Seperator -- SS Clutch & Brake Lines -- Billlet Grille -- GT500 Rear Diffuser -- Blue on Black Cue Ball Shifter Knob -- GT500 Steering Wheel
250 watt 10" Bazookah Tube -- JBL GTO8628 6x8"
The Smoking Tire One Take:


#15 mariusvt

mariusvt

    Rewards Level 3

  • Members
  • 4,284 posts
  • 3691 reward credits
  • Pennsylvania
Garage View Garage

Posted September 14, 2017 - 02:09 PM

After looking at a bumper parts diagram, you're probably looking for a valance panel screw, w711103-s900. Note if you Google the part number you'll get a ton of different descriptions.

2013 SGM 3.7 | MPT Tune | JBA Titanium Ceramic Shorty Headers | MGW Gen 1 | Blowfish Street Bracket | BBK TB | 18" Charcoal AMR | FRPP 3.55 | BMR LCA | Steeda Panhard Bar |  Dynotech 3.5" Driveshaft |

 

 


#16 Unclenard

Unclenard

    FFM Owner

  • Super Mod
  • 3,043 posts
  • 2527 reward credits
  • St Petersburg
  • Florida
Garage View Garage

Posted September 14, 2017 - 03:13 PM

Use something like this then you will have a tow hook too.

 

wood-screw-swing-hanger-SH-20R__15039.12


2012 V6 Premium  •  Kona Blue  •  Charcoal black leather  •  1.79 60' 12.527 @ 107.47 mph Unclenard.com
Super Six ported heads & upper/lower intakes  •  MPT dyno tuned  •  Airaid CAI  •  BBK TB • BBK shorty headers & O/R X-pipe • Borla ATAK • DSS • 3.73 gears Circle D 5C

Forgestar F14's 19x9/19x10 • Strange Adj. Shocks • BMR LCAs • UPR UCA & bracket • Eaton Detroit Truetrac

M/T ET Streets on SVE Drag Wheels 17x4.5/15x8  •  Steeda radiator support  •  CHE bumper support  •  Odyssey PC680 with custom mount

 

ForumSig02.jpg


#17 LIGISTX

LIGISTX

    Rewards Level 3

  • Members
  • 6,368 posts
  • 5660 reward credits
  • Los Angeles
  • California
Garage View Garage

Posted September 14, 2017 - 03:22 PM

Use something like this then you will have a tow hook too.

wood-screw-swing-hanger-SH-20R__15039.12


Lol


Sent from my iPhone using Tapatalk

JLT CAI -- 73mm BBK TB -- Lone Wolf Ported Mani's -- BBK Ceramic Shorties -- Borla ATAK -- MPT 91 Tune
MGW Race Spec -- RAM HDX -- Fidanza 12lbs flywheel -- DSS Aluminum -- 3.73 Rear
Koni Yellow's -- J&M CC Plates -- SR Springs -- Boss 302 Strut Brace -- BMR LCA's, Relo's, Adj. PHR, Motor Mounts
275/40 R19 MPSS -- 19x9.5 SVE Drifts -- Hawk HPS 5.0
JLT Oil Seperator -- SS Clutch & Brake Lines -- Billlet Grille -- GT500 Rear Diffuser -- Blue on Black Cue Ball Shifter Knob -- GT500 Steering Wheel
250 watt 10" Bazookah Tube -- JBL GTO8628 6x8"
The Smoking Tire One Take:


#18 LIGISTX

LIGISTX

    Rewards Level 3

  • Members
  • 6,368 posts
  • 5660 reward credits
  • Los Angeles
  • California
Garage View Garage

Posted September 14, 2017 - 03:24 PM

After looking at a bumper parts diagram, you're probably looking for a valance panel screw, w711103-s900. Note if you Google the part number you'll get a ton of different descriptions.


Yea. That's what I figured. Number 17 in the diagram is that part number.

c6d66c83e40a666b7424d54de8e10f6c.png


Sent from my iPhone using Tapatalk

JLT CAI -- 73mm BBK TB -- Lone Wolf Ported Mani's -- BBK Ceramic Shorties -- Borla ATAK -- MPT 91 Tune
MGW Race Spec -- RAM HDX -- Fidanza 12lbs flywheel -- DSS Aluminum -- 3.73 Rear
Koni Yellow's -- J&M CC Plates -- SR Springs -- Boss 302 Strut Brace -- BMR LCA's, Relo's, Adj. PHR, Motor Mounts
275/40 R19 MPSS -- 19x9.5 SVE Drifts -- Hawk HPS 5.0
JLT Oil Seperator -- SS Clutch & Brake Lines -- Billlet Grille -- GT500 Rear Diffuser -- Blue on Black Cue Ball Shifter Knob -- GT500 Steering Wheel
250 watt 10" Bazookah Tube -- JBL GTO8628 6x8"
The Smoking Tire One Take:


#19 Unclenard

Unclenard

    FFM Owner

  • Super Mod
  • 3,043 posts
  • 2527 reward credits
  • St Petersburg
  • Florida
Garage View Garage

Posted September 14, 2017 - 03:37 PM

Yea. That's what I figured. Number 17 in the diagram is that part number.

c6d66c83e40a666b7424d54de8e10f6c.png
 

 

Actually I think it might be #2.  I believe they had a washer and that looks like it would line up with #14 which is that clip.


2012 V6 Premium  •  Kona Blue  •  Charcoal black leather  •  1.79 60' 12.527 @ 107.47 mph Unclenard.com
Super Six ported heads & upper/lower intakes  •  MPT dyno tuned  •  Airaid CAI  •  BBK TB • BBK shorty headers & O/R X-pipe • Borla ATAK • DSS • 3.73 gears Circle D 5C

Forgestar F14's 19x9/19x10 • Strange Adj. Shocks • BMR LCAs • UPR UCA & bracket • Eaton Detroit Truetrac

M/T ET Streets on SVE Drag Wheels 17x4.5/15x8  •  Steeda radiator support  •  CHE bumper support  •  Odyssey PC680 with custom mount

 

ForumSig02.jpg


#20 mariusvt

mariusvt

    Rewards Level 3

  • Members
  • 4,284 posts
  • 3691 reward credits
  • Pennsylvania
Garage View Garage

Posted September 14, 2017 - 09:28 PM

They are cheap,I'd buy a few that are from that area. One is bound to work

2013 SGM 3.7 | MPT Tune | JBA Titanium Ceramic Shorty Headers | MGW Gen 1 | Blowfish Street Bracket | BBK TB | 18" Charcoal AMR | FRPP 3.55 | BMR LCA | Steeda Panhard Bar |  Dynotech 3.5" Driveshaft |

 

 





Skin Designed By Evanescence at IBSkin.com